v r s m = 100 v , i f(av) = 1 5 a trench schottky diode fme t - 2 1 5 1 0 fme t - 2 1 5 1 0 - dse rev. 0.2 sanken electric co.,ltd. 1 apr. 12 , 2 01 6 preliminary features fme t - 2 1 5 1 0 is 100 v / 1 5 a schottky diode of the trench structure and has the improved c haracteristics of v f and i r . these characteristic s realize the improving of power supply efficiency , and the high frequency system. v rm -------------------------------- ---------------------- 100 v i f(av) -------------------------------- ------------------------ 1 5 a v f ( 1 25 c , i f = 3.5 a ) ------------------------- 0.57 v typ . applications the high speed switching applications as follows: dc - dc converter adapter package to 220f - 3 l not to scale absolute maximum ratings ? unless otherwise specified, t j is 25 c parameter symbol rating unit notes peak repetitive reverse voltage v r s m 100 v repetitive reverse voltage v rm 100 v average forward current i f(av) 1 5 a surge forward current i fsm 10 0 a 10 ms half sine wave, one shot junction temperature t j ? stg ? electrical characteristics ? unless otherwise specified, t j is 25 c parameter symbol test conditions min . t yp . m ax . unit forward voltage drop v f i f = 3.5 a ? ? i f = 7.5 a ? ? f t j = 1 25 c , i f = 3.5 a ? ? j = 1 25 c , i f = 7.5 a ? ? r v r = v rm ? ? r v r = v rm , t j = 150 c ? th (j - c ) ? ? th(j - c) is thermal resistance between junction and case. case temperature (t c ) is measured at the under of the screw hole of case . http://www.sanken - ele.co.j p/en (1)(2)(3) (1) (1) anode (2) c athode (3) anode (2) (3)
fme t - 2 1 5 1 0 fme t - 2 1 5 1 0 - dse rev. 0.2 sanken electric co.,ltd. 2 apr. 12 , 2 01 6 preliminary performance curves figure 1 typical forward characteristics figure 2 typical reverse leakage current characteristics 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1 1.2 forward curernt, i f (a) forward voltage drop, v f (v) t j = 25 c t j = 100 c t j = 150 c t j = 125 c 1.0e - 07 1.0e - 06 1.0e - 05 1.0e - 04 1.0e - 03 1.0e - 02 0 20 40 60 80 100 reverse leakage current, i r (a) reverse volatage, v r (v) t j = 25 c t j = 100 c t j = 150 c t j = 125 c
fme t - 2 1 5 1 0 fme t - 2 1 5 1 0 - dse rev. 0.2 sanken electric co.,ltd. 3 apr. 12 , 2 01 6 preliminary power dissipation curves figure 3 forward power dissipation , p f vs. average forward current, i f(av ) figure 4 reverse power dissipation, p r vs. reverse voltage , v r 0 5 10 15 20 0 3 6 9 12 15 forward power dissipation, p f ( w) average forward current, i f(av) (a) t/t=1/6 t/t=1/3,sinewave t/t=1/2 dc 0 1 2 3 4 5 0 20 40 60 80 100 reverse power dissipation, p r (w) reverse voltage , v r (v) 1 - t/t=5/6 1 - t/t=2/3 1 - t/t=1/2 sinewave t j = 150 c t j = 150 c t t
fme t - 2 1 5 1 0 fme t - 2 1 5 1 0 - dse rev. 0.2 sanken electric co.,ltd. 4 apr. 12 , 2 01 6 preliminary derating curves figure 5 average rectified forward current, i f(av) vs. case temperatur e figure 6 average rectified forward current, i f(av) vs. case temperatur e 0 3 6 9 12 15 50 100 150 average forward current , i f(av) (a) case temperature ( r = 0 (v) 0 3 6 9 12 15 50 100 150 average forward current , i f(av) (a) case temperature ( r = 100 (v) t j = 150 c t j = 150 c t t
fme t - 2 1 5 1 0 fme t - 2 1 5 1 0 - dse rev. 0.2 sanken electric co.,ltd. 5 apr. 12 , 2 01 6 preliminary package outline to 220f - 3 l notes: 1) dimension is in millimeters . 2) pin treatment pb - free. device composition compliant with the rohs directive . marking diagram 1 e t 1 5 1 0 y m d d 3 2 p a r t n u m b e r l o t n u m b e r : y i s t h e l a s t d i g i t o f t h e y e a r o f m a n u f a c t u r e ( 0 t o 9 ) m i s t h e m o n t h o f t h e y e a r ( 1 t o 9 , o , n o r d ) d d i s t h e d a y o f t h e m o n t h ( 0 1 t o 3 1 )
fme t - 2 1 5 1 0 fme t - 2 1 5 1 0 - dse rev. 0.2 sanken electric co.,ltd. 6 apr. 12 , 2 01 6 preliminary important notes all data, illustrations, graphs , tables and any other information included in this document as to sanken s products listed herein (the sanken products) are current as of the date this document is issued . all contents in this document are subject to any change without notice due to improvement of the sanken products , etc. please make sure to confirm with a sanken sales representative that the co ntents set forth in this document reflect the latest revisions before use. the sanken products are intended for use as components of general purpose electronic equipment or apparatus (such as home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). prior to use of the sanken products, please put your signature, or affix your name and seal, on the specification documents of the sanken products and return them to sanken. when considering use of the sanken products for any ap plications that require high er reliability (such as transportation equipment and its control systems, traffic signal control systems or equipment , disaster/crime alarm systems, various safety devices, etc.), you must contact a sanken sales representative t o discuss the suitability of such use and put your signature, or affix your name and seal, on the specification documents of the sanken products and return them to sanken, prior to the use of the sanken products. the sanken products are not intended for us e in any applications that require extremely high reliability such as: aerospace equipment; nuclear power control systems; and medical equipment or systems, whose failure or malfunction may result in death or serious injury to people, i.e., medical devices in class iii or a higher class as defined by relevant laws of japan (collectively, the specific applications). sanken assumes no liability or responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third pa rty, resulting from the use of the sanken products in the specific applications or in manner not in compliance with the instructions set forth herein. in the event of using the sanken p roducts by either (i) combining other products or materials therewith o r (ii) physically, chemically or otherwise processing or treating the same , you must duly consider all possible risks that may result from all such uses in advance and proceed therewith at your own responsibility. although sanken is making efforts to enhan ce the quality and reliability of its products, it is impossible to completely avoid the occurrence of any failure or defect in semiconductor products at a certain rate. you must take, at your own responsibility , preventative measures including using a suf ficient safety design and confirming safety of any equipment or systems in/for which the sanken products are used, upon due consideration of a failure occurrence rate or derating, etc., in order not to cause any human injury or death, fire accident or social harm which may result from any failure or malfunction of the sanken products. please refer to the relevant specification documents and sanken s official website in relation to derating. no a nti - radioactive ray design ha s been adopted for the san ken p roducts. no contents in this document can be transcribed or copied without sankens prior written consent. the c ircuit constant , operation examples, circuit examples, pattern layout examples, design examples , recommended examples , all information and evaluation result s based thereon, etc., described in this document are presented for the sole purpose of reference of use of the sanken products and sanken assume s no responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third party, or any possible infringement of any and all property rights including intellectual property rights and any other rights of you, u sers or any third party , result ing from the foregoing . all technical information described in this document (the technical information) is presen ted for the sole purpose of reference of use of the sanken products and no license, express, implied or otherwise, is granted hereby under any intellectual property rights or any other rights of sanken. unless otherwise agreed in writing between sanken and you, sanken makes no warranty of any kind, whether express or implied, including, without limitation, any warranty (i) as to the quality or performance of the sank en products (such as implied warranty of merchantability, or implied warranty of fitness for a particular purpose or special environment), (ii) that any sanken pro duct is delivered free of claims of third parties by way of infringement or the like, (iii) t hat may arise from course of performance, course of dealing or usage of trade, and (iv) as to any information contained in this document (including its accuracy, usefulness, or reliability). in the event of using the sanken products, you must use the same after carefully examining all applicable environmental laws and regulations that regulate the inclusion or use of any particular controlled substances, including , but not limi ted to , the eu rohs directive , so as to be in strict compliance with such applica ble laws and regulations . you must not use the sanken products or the technical information for the purpose of any military applications or use, including but not limited to the development of weapons of mass destruction. in the event of exporting the sank en products or the technical information, or providing them for non - residents, you must comply with all applicable export control laws and regulations in each country including the u.s. export administration regulations (ear) and the foreign exchange and f oreign trade act of japan , and follow the procedures required by such applicable laws and regulations. sanken assumes no responsibility for any troubles, which may occur during the transportation of the sanken products including the falling thereof, out of sankens distribution network. although sanken has prepared this document with its due care to pursue the accuracy thereof, sanken does not warrant that it is error free and sanken assumes no liability whatsoever for any and all damages and losses which m ay be suffered by you resulting from any possible error s or omissions in connection with the contents included herein . please refer to the relevant specification documents in relation to particular precautions when using the sanken products, and refer to our official website in relation to general instructions and directions for us ing the sanken products. dsgn - cez - 16001
|
